How to Fix the Automatic Repair Loop in Windows – Microsoft Community

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

I restarted it several times and ended up with the same ‘preparing automatic repair’ windows. Automatic repair loop usually happens on Windows 10 PC, while automatic repair loop on Windows 8 is also reported by a considerable amount of users.

Fix Network Connection Issues in Windows The tool is designed to launch automatically when a start-up problem comes up on Windows system. Normally, by running Automatic Repair, Windows diagnoses the start-up problem missing or corrupt system files, drivers, registry settings, etc. But when Windows didn’t shut down properly, it gets into automatic repair loop.

For example, if your PC powered off improperly because of a power outage, system crash, data in the registry could be incomplete and corrupt, which lead to the automatic repair loop. So to prevent your Acer, Toshiba, Lenovo, Surface automatic repair loop in the future, you may want to avoid force quit Windows. Sometimes, your PC gets stuck at automatic repair loop or is attempting repair forever because Windows thinks that there is a problem with your PC while there is not, so you may just restart the PC.

Step 1. If you see “your PC did not start correctly”, you can go into Boot Options menu and use Command Prompt to get out of automatic repair loop. Step 2. Enter the following lines and press Enter after each line to run it:bootrec. Then restart the PC. If the bootrec. Some users also discover that the Early launch anti-malware protection option is related to the automatic repair loop.

After the PC restarts, choose to Disable early launch anti-malware protection;. When Windows shows “Windows Automatic Repair couldn’t repair your PC”, it could indicate a corrupted registry on your computer. Therefore, you can get your Windows out of automatic repair loop by restoring the registry from RegBack directory. Step 3. When you are asked whether to overwrite files, type All and press Enter;.

Step 4. Finally, type exit and press Enter to exit Command Prompt. Restart the PC. The vsock. Note: It is not always vsock. In your case, it may show other files that are corrupted. So if you get other results rather than vsock. Select a restore point that created before the automatic repair loop. Windows will restore your computer to the original status.

After system restore, the files that are created after the system point will be deleted. If some important files are missing, you can use FonePaw Data Recovery to get back the deleted files, photos, videos, audio, emails.

Click Scan and FonePaw Data Recovery will scan out all files from the drive, including the deleted ones. Leave your solution below. Stuck in Windows 10 Automatic Repair Loop? Thursday, October 10, Data Recovery.

 
 

Windows 8.1 automatic repair loop free. 7 Ways Fix – Stuck in Windows Automatic Repair loop!

 

My laptop, a Lenovo Y50 running Windows windows 8.1 automatic repair loop free. I’ve gone into the command prompt and disabled ajtomatic repair itself, so now whenever I attempt to boot it up it just says it’s unable to, and I get the error code 0xc, identifying the problem with mfedhidk.

My laptop doesn’t have a disk drive, so I can’t reinstall Windows that way. Whenever Automaitc try to boot in safe mode it just frre and brings me back to the same screen. As the troubleshooting steps mentioned above failed to fix the autlmatic, we need to reinstall Windows. If the computer came with Windows Operating System pre-installed in it, that is, if OEM version of Windows was installed in the computer, then you may try to reset the computer to factory settings.

You may refer the articles below to do that. Was this reply helpful? Yes No. Sorry windows 8.1 automatic repair loop free didn’t help. Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 8. Any sort of help would be appreciated. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question reoair.

Report abuse. Details required :. Cancel Submit. In reply to greatusername’s post on February 8, Note: There is a chance of data loss. So, if you are not sure about the steps, then I suggest you to contact Lenovo and however, it is always better to contact the computer manufacturer if you need to reset the computer to factory settings.

You may use the link below wundows do that. Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. Thank you for providing detailed information about the issue.

I can imagine the inconvenience you are experiencing at this moment. I appreciate your efforts to resolve the issue. Do not worry, I will assist you on this. First of re;air, we need a Windows 8. So, you can download Repaie 8. Refer windows 8.1 automatic repair loop free steps below to do that. Connect the Windows 8. Press a key when you are prompted. Select the languagetimecurrencykeyboardor an input method, and then click Next.

Click Windows 8.1 automatic repair loop free your computer. Choose the option Troubleshoot and select Advanced options. If the above method fails to fix the issue then start Windows Recovery Environment again and click on Command Prompt and type the following commands and hit Enter.

Method 3 If still the issue persists then try performing System Restore from the Windows Recovery Environment and check the issue. Note: When you use System Читать далее to restore the computer to a previous state, programs and updates that you installed are removed.

Hope this information helps. Otherwise, please write to us with the results, autokatic will be glad to assist you further. This site 81 other languages x.

 

Windows 8.1 automatic repair loop free

 

This solution is to disable the automatic repair from starting if your computer fails to boot into windows. Step 2: When the install screen pops up, look to the bottom left and select “Repair Your Computer”.

Step 3: You will now see a screen that says “Choose an option”. Step 5: A list should have appeared. Towards the top, you should see “resumeobject” It is under “default”.

Highlight the long number, including the brackets, and copy. Hit enter. Step 7: You should be able to log in now. Restart the computer and the computer should boot normally. Step 5: The scan should start. This could take several hours depending on the size of your hard drive. Step 3: If you see “Windows Boot Manager” as number 1 in your priority, change it so that your hard drive is number 1. Microsoft community, please do not delete this thread.

These are confirmed solutions that have worked for many others with the automatic repair loop problem. I will add more if any other solutions become available. Was this discussion helpful? Yes No. Sorry this didn’t help. I tried all three of these solutions and could not bypass the loop! I tried everything and spent hours googling! I then saved and exited my BIOS screen. When my computer restarted it booted right to my log in screen with no more issues! To make sure it was actually fixed I restarted my PC and everything is back to normal.

I’m not sure why some fixes work for some and don’t work for others. Was this reply helpful? I’m glad you have figured out another solution!

If you don’t mind, I am going to add your solution to my main post for others to see. I’m not familiar with Toshiba. I did find this forum topic with some information on how to access the bios. Hi there, in relation to your comment. I can’t change the new boot option without setting: “add boot option”, “select filesystem” and “path for boot option” and I don’t know what I need to type in the last box?

Can someone please help me as this’s a really frustrating me that windows has done this. I can’t access my log in or any documents at all and it has all of my up to date uni work on there for my corse!

Windows need to sort this out. As I won’t be using them again for my OS! These solutions even the Bcdedit, likely won’t work for most people.

As is typical with Microcrap, their automatic options are terrible and usually never ever work correctly. I did the Advanced Options and went to the Command Prompt and tried the Bcdedit several times and that never did disable the Startup Automatic Repair so that option isn’t likely to work for anyone too well.

Even though on my scan it found “no drive errors,” at all, so likely this was a false error reporting by the hugely bugged Windows 8. I tried it the way you did Olari and it “did not work” for me at all, nor did it work on 2 other Windows 8. Thank you for writing this, but we tried it on 3 Windows 8.

I encountered the problem after my laptop suddenly switched off while rendering video maybe because of the excessive CPU heat. When I restarted it, Windows failed to load and the automatic repair loop kicked in.

To use the tool, you need a Windows installation media connected to your computer and fix the blue screen error with the steps below:. Step 6. Type exit to close Command Prompt and restart the computer. When your computer fails to start, bootrec.

The Registry is a database that contains the configuration information of the operating system and most of the applications. When Registry corrupts, it may lead to serious problems like the Automatic Repair loop. The good news is that the registry makes a backup of configuration data automatically. You can use the backup to restore the Windows registry to a working version. If you have created a Windows restore point before the Automatic Repair loop occurs, you can perform a system restore to cope with the issue.

Note that performing system restore will overwrite your files on the system C drive, remember to get your data out of the computer first. You can revert to restore data in two reliable ways. Choose a restore point, click “Next” to restore your computer to a healthy state. When the computer doesn’t respond with a black screen, warning “Preparing Automatic Repair”, perform a hard reboot first.

A hard reboot is a way of restarting your computer manually instead of using the operating system controls soft reboot. Safe Mode is a diagnostic mode of Windows.

If you do not have an installation disc, follow the Microsoft guide to creating a Windows Installation Media.

Choose to boot from the installation media from the screen. Wait for the program to be loaded. The Automatic Repair itself can also be the reason why your computer can’t boot properly. You can disable Automatic Repair in Windows to fix this issue. The official Microsoft solution to an endless ‘Preparing Automatic Repair’ loop is to refresh or reset the PC directly.

Note that refreshing or resetting the PC will cause serious data loss, remember to get your data off the computer first. Upon the ‘Preparing automatic repair’ window, press-and-hold Power button three times. Follow the on-screen guidelines to complete resetting your PC.

After this, restart your computer and you’ll be able to work on it again. Issues related to Automatic Repair in Windows could trouble you for hours or days. And the last way that you can try is to reinstall Windows 10 on your computer. If you are having this issue, we suggest you follow through with this complete guide. If your data matters a log, remember to use EaseUS bootable data recovery software to get your data out of the unbootable PC first.

You can then try the above fixes based on your situation – whether you are having a blue screen “Automatic Repair” or a black screen “Preparing Automatic Repair” error. Last but not least, we would also recommend you create a system backup image immediately.

It will always save your life and bring your computer back to life anytime when your computer dies. He mainly writes articles about data recovery tutorials on PC and Mac and how-to tips for partition management. He always keeps an eye on new releases and likes various electronic products. Roxanne is one of the main contributors to EaseUS and has created multiple posts on digital devices like PCs, Mobile phones, tablets, Mac, etc. She loves to share ideas with people of the same interest.

It’s far from perfect, partly because today’s advanced disk technology makes data-recovery more difficult than it was with the simpler technology of the past. It comes with a selection of advanced features, including partition recovery, formatted drive restoration, and corrupted file repair. Learn How to Fix. Screen Recorder. Transfer Products. File Management. More Products. My Windows 10 computer has been stuck in a Windows Automatic Repair loop for a couple of days. About days ago, I started my laptop, it came up with the ‘preparing Automatic Repair screen.

I shut it down, then it rebooted automatically with an Automatic Repair loop. How can I fix this? Workable Solutions Step-by-step Troubleshooting Fix 1. Full steps Fix 2. Extend the System Partition Windows requires enough space to work properly. Extend system drive to fix “Preparing Automatic Repair” Full steps Fix 3.

Full steps Fix 4. Full steps Fix 5. Full steps. Recover data after system crash, sudden deletion, formatting, hard drive corruption, and virus attack under different situations. So, perform data recovery in advance, and then continue with the CMD method. If you haven’t received it yet, you can manually download it from a variety of channels.

Was This Page Helpful? Read full bio. Windows requires enough space to work properly. Disable early launch anti-malware protection is useful to fix Preparing Automatic Repair

 
 

Windows 8.1 automatic repair loop free. Windows Automatic Repair Loop (Fixed)

 
 

Don’t worry if Windows 10 Automatic Repair fails or your computer keeps prompting ‘Preparing Automatic Repair’ with a black or blue screen of death error. About the Author. Reviews and Awards. Is your computer keep restarting with an error message, telling that “Preparing Automatic Repair” or “Automatic Repair couldn’t repair your PC”?

Calm down and stay here with us. On this page, we’ll offer you a complete guide to quick fix the “Preparing Automatic Repair” loop in Windows 10 or Windows 8. Your Quick Guide: By following through the guides, you’ll successfully restore your computer from the “Preparing Automatic Repair” loop on your own.

If you are not interested in learning the causes of this error, you may start from Guide 2. Automatic Repair is a Windows built-in feature designed to fix boot-related issues when a startup problem arises automatically.

Sometimes, when it fails to work, the “Automatic Repair loop” error comes out, making your computer reboot again and again. As a result, you will encounter computer boot failure, and all the programs, services, and files on the computer will become inaccessible. Usually, the Automatic Repair or startup repair loop issue occurs right after a Windows update or an unexpected Windows shutdown.

So how do you solve the “Preparing Automatic Repair” error? Follow Guide 2 and Guide 3 thoroughly, you’ll make the computer work normally again. No matter what kind of situation you are in, either a blue screen or a black screen of the “Automatic Repair” loop, the most important thing is to get your data out of the “dead” computer first. Here, you’ll get two methods to rescue your Windows data from this error automatically or manually. If you prefer an easy and efficient way, Method 1 is worth trying.

Reliable bootable data recovery software – EaseUS Data Recovery Wizard with bootable media can help you boot up the computer with the “Automatic Repair” loop error from a created bootable disk.

Prepare an empty USB. If you have important data on it, copy the data to another device. When you create a bootable disk, the data on the USB will be erased. Select the USB drive and click “Create” to create a bootable disk. For most users, it works well when they restart their computer and press F2 at the same time to enter BIOS. Press “F10” to save and exit. Select the drive you want to scan to find all your lost files.

Recover data from the computer or laptop. After the scan completed, you can preview all recoverable files, select the targeted files, and click the “Recover” button to restore your files. You’d better save all of the recovered data to another place to avoid data overwriting.

Step 1. Unlock the computer case from your computer with an “Automatic Repair” error. Step 2. Remove the hard drive connection cables and unplug them from your computer.

Step 3. Reconnect the hard drive to another healthy computer as an external disk. Step 4. Restart the new PC and access the old computer drive data via File Explorer. Step 5. Copy and save all the hard drive data to another secure external hard drive. After this, it’s time that you take action to fix the “Windows 10 preparing automatic repair” error.

Depending on the specific situation you are in, you will have different solutions. The followings are all workable solutions that can bypass automatic repair on your computer with two cases: black screen or blue screen.

When an Automatic Repair fails, your computer will get a blue screen with “Your PC did not start correctly” or “Automatic repair couldn’t repair your PC. Follow the methods and check out how to restore your computer from the blue screen of Automatic Repair error on your own. A secure way to repair Windows 10 without data loss is using manual Windows repair services.

EaseUS professional technical team can help you solve any system startup errors, including system failure, system blue screen, system black screen, and so on. Consult with EaseUS data recovery experts for one-on-one manual recovery service.

We could offer the following services after FREE diagnosis:. Windows and some applications require enough space to work correctly. If the system drive on your computer is almost full, you may encounter problems like “Your PC ran into a problem” or Windows stuck at “Preparing Automatic Repair”. To make more free space for the system and applications, professional partition tool – EaseUS Partition Master can extend the system partition from a bootable disk and rescue the computer from a blue screen of Automatic Repair error:.

Then, correctly connect the drive to your computer. Click on it. However, if you do not have a storage device at hand, you can also save the ISO file to a local drive, and later burn it to a storage media. Once made the option, click the “Proceed” button to begin. Now, you can manage your hard disks and partitions through the bootable drive whenever the computer fails to boot normally. Set PC to boot from the bootable disk. On the boot menu, switch and set the original system disk as the boot drive.

Wait for the computer to boot up. If you see the login window, congratulations and you’ve successfully solved this issue. If the problem still exists, move to the next fixes for help. Another way to get out of the Windows Automatic Repair loop is to disable early launch anti-malware protection. You can do this from Command Prompt with the following steps:. If the computer system files are damaged or missing, that’s probably where the issue originates.

To use the tool, you need a Windows installation media connected to your computer and fix the blue screen error with the steps below:. Step 6. Type exit to close Command Prompt and restart the computer. When your computer fails to start, bootrec. The Registry is a database that contains the configuration information of the operating system and most of the applications.

When Registry corrupts, it may lead to serious problems like the Automatic Repair loop. The good news is that the registry makes a backup of configuration data automatically. You can use the backup to restore the Windows registry to a working version. If you have created a Windows restore point before the Automatic Repair loop occurs, you can perform a system restore to cope with the issue.

Note that performing system restore will overwrite your files on the system C drive, remember to get your data out of the computer first. You can revert to restore data in two reliable ways.

Choose a restore point, click “Next” to restore your computer to a healthy state. When the computer doesn’t respond with a black screen, warning “Preparing Automatic Repair”, perform a hard reboot first. A hard reboot is a way of restarting your computer manually instead of using the operating system controls soft reboot. Safe Mode is a diagnostic mode of Windows. If you do not have an installation disc, follow the Microsoft guide to creating a Windows Installation Media. Choose to boot from the installation media from the screen.

Wait for the program to be loaded. The Automatic Repair itself can also be the reason why your computer can’t boot properly. You can disable Automatic Repair in Windows to fix this issue. The official Microsoft solution to an endless ‘Preparing Automatic Repair’ loop is to refresh or reset the PC directly. Note that refreshing or resetting the PC will cause serious data loss, remember to get your data off the computer first.

Upon the ‘Preparing automatic repair’ window, press-and-hold Power button three times. Follow the on-screen guidelines to complete resetting your PC. After this, restart your computer and you’ll be able to work on it again. Issues related to Automatic Repair in Windows could trouble you for hours or days.

And the last way that you can try is to reinstall Windows 10 on your computer. If you are having this issue, we suggest you follow through with this complete guide. If your data matters a log, remember to use EaseUS bootable data recovery software to get your data out of the unbootable PC first.

You can then try the above fixes based on your situation – whether you are having a blue screen “Automatic Repair” or a black screen “Preparing Automatic Repair” error. Last but not least, we would also recommend you create a system backup image immediately. It will always save your life and bring your computer back to life anytime when your computer dies. He mainly writes articles about data recovery tutorials on PC and Mac and how-to tips for partition management.

He always keeps an eye on new releases and likes various electronic products. Roxanne is one of the main contributors to EaseUS and has created multiple posts on digital devices like PCs, Mobile phones, tablets, Mac, etc. She loves to share ideas with people of the same interest.